Elliot Setup Quick Start
Open WiFi Settings on your phone or other device. Remove the cover of Elliot, by depressing the clasps at the bottom OR Use a slim object such as a small screw driver, insert into hole on the front of Elliot and depress the button inside for 4 seconds. The green LED will flash quickly […]
LED Status Lights
LED Status Light Position The EVHACS unit has an LED status indicator. This is a very useful troubleshooting tool. The LED can tel you the status of your charger at a glance. The location the Status light depends on the type of installation you have. LED Light Colours
Energy Overload
  The EVHACS unit can detect an energy overload situation. If too much power is being consumed by Home, the power to the Heat Pump and EV charger (whichever is set to be the non-priority device) will be decreased and in extreme cases will be switched off to prevent an electrical overload. If […]
Viewing Energy Usage Data
EVHACS reports on live energy usage of Electric Vehicle charger, Heat Pump, and the rest of the Home. This data is updated every 30 seconds from the Elliot device to the EVHACS cloud. The app also detects if energy is coming from the Grid or from some domestic micro-generation such as wind or […]
Setting the Priority Device
The EVHACS charger is constantly energy load balancing between the heat-pump, electric vehicle and the rest of the home or building. In the case of high-power consumption from the rest of the home, the EVHACS unit will reduce the power going to the EV charger and/or heat pump. Setting the priority will determine which […]
Setting the Charging Power Level.
Setting the charging power level. The Charging power level can be set by selecting the Power icon on the main screen. Charging power level can be adjusted to higher or lower levels. Your EVHACS charger will always automatically load balance the energy. Set charging level to the maximum for the shortest charging time. If […]
Stop a Charging Session.
Stop a Charging Session. Swipe left by dragging the car icon with plug to the left, to the car icon without plug. The charging session will stop. This may take up to ten seconds. The EVHACS charger will also unlock the charging cable from the vehicle. Unplug the charging cable from the vehicle.
Start a Charging Session
Start a Charging Session If the vehicle is not plugged in, a message appears Please Plug in the Vehicle. Plug the charging cable into the vehicle and into the EVHACS charger. To start charging, simply swipe right by dragging the plug icon to the car icon. The charging session will begin. The status bar on […]
Personalise/Customise you Charger
Give your charger a user friendly nickname. Select the Grid menu from the top right corner of the main app screen. If you have guest access to other EVHACS chargers, make these chargers easy to identify by giving them a user friendly nickname. Select Configure Device Edit the Location and charger name. […]
Managing Multiple Chargers
If you have been invited to another charger e.g given access to EVHACS chargers at your workplace this charger will be accessible in your EVHACS app. Switching between Chargers. Select Chargers from the Main menu. A list of chargers you have access to appears. Switch between all chargers you have access to from one […]